Repository logo

Infoscience

  • English
  • French
Log In
Logo EPFL, École polytechnique fédérale de Lausanne

Infoscience

  • English
  • French
Log In
  1. Home
  2. Academic and Research Output
  3. Journal articles
  4. Accessibility and properties of ELMy H-mode and ITB plasmas in TCV
 
research article

Accessibility and properties of ELMy H-mode and ITB plasmas in TCV

Martin, Y. R.  
•
Henderson, M. A.  
•
Alberti, S.  
Show more
2003
Plasma Physics and Controlled Fusion

This paper presents experimental results on the accessibility and the properties of plasmas with improved confinement in TCV. First, the H-mode threshold power is measured in Ohmic plasmas. Above an Ohmic threshold density, the threshold power increases with the density. A lower threshold density is found when additional electron cyclotron heating (ECH) is applied. At these low densities, the threshold power increases dramatically with decreasing density. Only a small fraction of the wide operational domain leading to the Ohmic H-mode is found to lead to a stationary regime with edge localized modes (ELMs). The ELMs have an irregular frequency, but in TCV they can be triggered by an external magnetic perturbation that induces a rapid vertical movement of the plasma. With this perturbation, the ELM frequency can be increased. The ELM triggering mechanism is provided by the vertical movement of the plasma away from the X-point of a single null configuration. This movement induces a positive current at the plasma edge, and we deduce that the ELMs are being controlled by this modification of the plasma edge current. Electron internal transport barriers (eITBs) are produced deep in the plasma during the stationary phase of TCV discharges. Different scenarios of ECH or selectron cyclotron current drive (ECCD) at different radial locations have been used to obtain eITBs with and without inductively driven current. The eITBs are characterized by steep electron temperature gradients, high confinement improvement and a large fraction of bootstrap current. In plasmas with fully non-inductively driven current the size and the strength of the eITB are controlled by the location of the power deposition and by the co- or counter-direction of the central ECCD. Finally, a small inductive perturbation of an otherwise non-inductively driven plasma current profile progressively shrinks the eITB, confirming the link between current profiles and eITBs.

  • Details
  • Metrics
Type
research article
DOI
10.1088/0741-3335/45/12A/023
Web of Science ID

WOS:000188080900025

Author(s)
Martin, Y. R.  
Henderson, M. A.  
Alberti, S.  
Amorim, P.
Andrebe, Y.  
Appert, K.  
Arnoux, G.  
Behn, R.  
Blanchard, P.  
Bosshard, P.  
Show more
Date Issued

2003

Published in
Plasma Physics and Controlled Fusion
Volume

45

Start page

A351

End page

A365

Note

Suppl. 12A

Editorial or Peer reviewed

REVIEWED

Written at

EPFL

EPFL units
CRPP  
SPC  
Available on Infoscience
April 16, 2008
Use this identifier to reference this record
https://infoscience.epfl.ch/handle/20.500.14299/21937
Logo EPFL, École polytechnique fédérale de Lausanne
  • Contact
  • infoscience@epfl.ch

  • Follow us on Facebook
  • Follow us on Instagram
  • Follow us on LinkedIn
  • Follow us on X
  • Follow us on Youtube
AccessibilityLegal noticePrivacy policyCookie settingsEnd User AgreementGet helpFeedback

Infoscience is a service managed and provided by the Library and IT Services of EPFL. © EPFL, tous droits réservés