Pyroelectric thin film sensor arrays integrated on silicon
Sol-gel deposited Pb(Ti,Zr)O-3 thin films have been used to integrate pyroelectric arrays on silicon. The arrays of 1x12 (element size of 600 x 1100 mm(2)) and 1x50 elements (element size of 140 x 1100 mm(2)) are fabricated by standard photolithography techniques on top of a SiO2/Si3N4 buffer layer which acts as a thermally insulating membrane after micromachining of the silicon. The devices have been characterized using a large aperture blackbody radiation source operating at 423 K. Its radiation is focussed by an infrared optics onto a single element and provides a power density of 67 W/m(2). A voltage responsivity of 460 V/W at a chopping frequency of 1 Hz is achieved. The frequency dependencies of the obtained current and voltage responsitivities allow to deduce the thermal and electrical time constants which are compared to thermal finite element calculations and the electrical circuit model.
WOS:A1997YH27100017
1997
201
1-4
147
156
Willing, B Ecole Polytech Fed Lausanne,Lab Ceram,Ch-1015 Lausanne,Switzerland
Yh271
Cited References Count:14
REVIEWED