Loading...
report
MICROFABRICATED HALL SENSORS MINIATURIZED TO THE NANOMETER SCALE
2006
The aim of the project is the development of a new technology for the fabrication of bismuth (Bi) micro-nano Hall sensors integrated on plastic cantilevers. Bi, a semi-metal, is deposited by evaporation and structured by lift-off. Four electrodes made with Ti-Al are deposited and structured in the same way as Bi. SU-8 cantilevers and carrier chip are structured by photolithography process. The smallest size of the Hall sensor active area obtained with the photolithography was 2 x 2 um2 and was reduced to the nanometer scale (200x200 nm2) by the mean of the focused ion beam (FIB).
Loading...
Name
Mouaziz_Schahrazede_CMI_2006.pdf
Access type
restricted
Size
125.79 KB
Format
Adobe PDF
Checksum (MD5)
3c75ca04a96b412d15f6acb4ff10e527