New metric for carrier selective contacts for silicon heterojunction solar cells
Heterojunction carrier selective contacts for solar cells have gained great attention because of the ability of these contacts to efficiently collect majority carriers while hindering the recombination of minority carriers, thus resulting in the highest reported voltage among crystalline silicon technologies. The electrode work-function, doping and thickness of the doped layer remain the key parameters for governing the cell performance. Recently, we have studied the requirements for carrier selective contacts under various illumination levels and reported logarithmic dependence of these parameters. In this work, we define a new metric for describing the ability of a contact to collect the carriers and named it as contact strength. We have developed an analytical approach for contact strength of hole selective contacts which represents the requirements on doping, thickness of the contact layer, and electrode work-function for a given illumination. First, the numerical model is cali-brated with the experimental data for a wide range of illumination (0.01 Sun - 1.0 Sun) and then simulations have been fitted with analytical model. For the selective contact layer, we observe that only the total charge, rather than thickness and doping individually, matters. The work-function of the top electrode also contributes strongly to contact strength and can in principle substitute doped layer. This insightful metric will guide the solar cell technologists to better understand the carrier selective contacts and to maximize the cell performance not only at standard test conditions (STC), but also at low light illuminations.
WOS:000862848200005
2022-09-15
244
168
174
REVIEWED