6 DOF repeatability measurement setup for measuring position of assembled silicon parts with nanometric resolution
This article presents a test setup dedicated to the measurement of the 6 degrees of freedom relative positioning assembly repeatability of three micro-manufactured parts equivalent to those composing a mesoscale flexure-based robot. The typical size of the parts is 20 x 20 x 0.5 mm. The parts are positioned with respect to each other by means of a novel alignment method that is under development. The required positioning repeatability is at least 100 nm in translation (x,y,z) and 17 ÎĽrad in the rotation (Rx, Ry and Rz). The test setup was realised and the first measurements results of the novel method of alignment are presented.
2015_EUSPEN_6 DOF repeatability measurement setup for measuring position of assembled silicon parts with nanometric resolution.pdf
postprint
openaccess
CC BY
341.99 KB
Adobe PDF
46d6504ee89fcb3b1337a4128471eafe