Quench Level of the HL-LHC Nb3Sn IR Quadrupoles

The scope of the Large Hadron Collider Hi-Lumi Project at CERN includes the installation of several superconducting magnets wound with Nb3Sn Rutherford cables. The quench level of these magnets (i.e. the maximum energy that a cable can tolerate without quenching) is a key value required to set magnet protection from beam losses, and is expected to be significantly different from the computed and measured levels of the LHC Nb-Ti magnets. In this work, we applied a one-dimensional numerical model of multi-strand Rutherford cables to simulate the electro-thermal instabilities caused by the heat released by the particle beam losses. Two models have been applied, one based on the analysis of the single strand, and the other accounting for all the strands in the multi-strand cable. The results of these two models are compared to analyze the effects of heat and current redistribution during quench. A comparison between the quench energy values obtained for the Nb3Sn conductor in the working conditions of the LHC Hi-Lumi inner triplet low-β quadrupole (MQXF) and those of the NbTi Rutherford cable of the LHC main quadrupole magnet (MQ) is presented. The differences and similarities in quench performance between the impregnated cables for Nb3Sn magnets and the non-impregnated ones for NbTi magnets at their respective typical working conditions in superconducting accelerator magnets are highlighted.


Publié dans:
IEEE Transactions on Applied Superconductivity, 27, 4, 1-5
Année
Jun 01 2017
Mots-clefs:
Laboratoires:


Note: Le statut de ce fichier est:


 Notice créée le 2019-12-06, modifiée le 2019-12-11

Fichiers:
Télécharger le document
PDF

Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)