Bio-Inspired Fluorine-Free Self-Cleaning Polymer Coatings
Bio-inspired fluorine-free and self-cleaning polymer coatings were developed using a combination of self-assembly and UV-printing processes. Nasturtium and lotus leaves were selected as natural template surfaces. A UV-curable acrylate oligomer and three acrylated siloxane comonomers with different molecular weights were used. The spontaneous migration of the comonomers towards the polymer-air interface was found to be faster for comonomers with higher molecular weight, and enabled to create hydrophobic surfaces with a water contact angle (WCA) of 105 degrees. The replication fidelity was limited for the nasturtium surface, due to a lack of replication of the sub-micron features. It was accurate for the lotus leaf surface whose hierarchical texture, comprising micropapillae and sub-micron crystalloids, was well reproduced in the acrylate/comonomer material. The WCA of synthetic replica of lotus increased from 144 degrees to 152 degrees with increasing creep time under pressure to 5 min prior to polymerization. In spite of a water sliding angle above 10 degrees, the synthetic lotus surface was self-cleaning with water droplets when contaminated with hydrophobic pepper particles, provided that the droplets had some kinetic energy.
Bio-Inspired Fluorine-Free Self-Cleaning Polymer Coatings.pdf
Publisher's version
openaccess
CC BY
1.46 MB
Adobe PDF
b35d3684371d3a408f913b60f535cae0