Redox Solid Energy Boosters for Flow Batteries: Polyaniline as a Case Study

In this work, the viability of polyaniline as a solid charge storage material in an aqueous redox-mediated flow battery is investigated. Fe(III/II) and V(IV/III) were identified as potential redox mediators to target the emeraldine-pernigraniline and leucoemeraldine-emeraldine redox transitions of the polymer. An indirect chemical cycling method was developed and used to investigate the charging/discharging of the polymer by the selected redox mediators. With Fe(III/II) as a redox mediator, respectable specific capacity and cycling stability were demonstrated over 25 cycles. V(IV/III) was deemed unsuitable as a redox mediator, due to rather poor kinetics. When added to the electrolyte tanks of a complete flow battery, a conductive composite of polyaniline and carbon black provided a significant improvement in capacity, exhibiting a specific capacity of 64.8 mA h g−1 at a current density of 38.5 mA cm−2. This represents a three-fold improvement in volumetric capacity, compared with the electrolyte alone. Moreover, the addition of the polyaniline composite was observed to lower the average potential at the positive electrode, providing a considerable improvement in voltage efficiency. This work demonstrates the potential of utilizing redox mediators to enable bulk solid-phase charge storage in the tanks of aqueous redox flow batteries

Published in:
Electrochimica Acta, 235, 664-671

Note: The status of this file is: Anyone

 Record created 2017-05-02, last modified 2020-05-19

Publisher's version:
Download fulltextPDF
Supporting Information:
Download fulltextDOCX
Rate this document:

Rate this document:
(Not yet reviewed)