Wind-tunnel study of the wake behind a vertical axis wind turbine in a boundary layer flow using stereoscopic particle image velocimetry

Stereo particle image velocimetry is used in a wind-tunnel to study boundary layer effects in the wake behind a vertical axis wind turbine. The turbine is a three-bladed giromill with a solidity of 1.18. The wake is studied for a tip speed ratio of 2 and an average chord Reynolds number of 1.6 × 104. The velocity deficit and turbulence levels in the horizontal plane are observed to be strongly asymmetrical with two strong peaks corresponding to the two halves of the rotor where blades move either towards the oncoming flow or away from it. The stronger peak is measured behind the blades moving upstream, however this region also benefits from a greater rate of re-energization. Due to the incoming boundary layer profile, momentum is also entrained downwards into the wake from above and aids with the recovery of the core of the wake.

Barthelmie, R
Aubrunsanches, S
Leweke, T
Masson, C
Porteangel, F
Schepers, G
Vankuik, G
Larsen, G
Mann, J
Rodrigo, Js
Meyers, J
Published in:
Journal of Physics: Conference Series, 625, 1, 012012
Presented at:
Wake Conference, Visby, Sweden, June 9-11, 2015
Bristol, IOP Publishing Ltd

 Record created 2016-01-13, last modified 2019-12-05

Rate this document:

Rate this document:
(Not yet reviewed)