Wireless Monitoring in Intensive Care Units by a 3D-Printed System with Embedded Electronics

The design, realization, and preliminary test of a portable wireless system for measuring key metabolites (e.g., glucose, lactate, calcium, potassium, etc..) in intensive cure monitoring is presented. The system is composed by a 3D-Printed case, which includes the fluidic system that drives the monitored human fluids on top of the sensing devices. The case fully integrates a hardware platform on PCB that connects the biosensors to the read-out frontend and to a Bluetooth® module for the data transmission to a mobile Android interface for vital signs visualization. Preliminary in-vitro tests on calibration for some key metabolites of interest are presented.


Published in:
Proceedings of the IEEE/CAS-EMB Biomedical Circuits and Systems Conference (BioCAS 2015)
Presented at:
IEEE/CAS-EMB Biomedical Circuits and Systems Conference (BioCAS 2015), Atlanta, Georgia, USA, October 22-24, 2015
Year:
2015
Keywords:
Laboratories:




 Record created 2015-09-08, last modified 2018-11-26

n/a:
Download fulltext
PDF

Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)