Time and frequency pump-probe multiplexing to enhance the signal response of Brillouin optical time-domain analyzers

A technique to enhance the response and performance of Brillouin distributed fiber sensors is proposed and experimentally validated. The method consists in creating a multi-frequency pump pulse interacting with a matching multi-frequency continuous-wave probe. To avoid nonlinear cross-interaction between spectral lines, the method requires that the distinct pump pulse components and temporal traces reaching the photo-detector are subject to wavelength-selective delaying. This way the total pump and probe powers launched into the fiber can be incrementally boosted beyond the thresholds imposed by nonlinear effects. As a consequence of the multiplied pump-probe Brillouin interactions occurring along the fiber, the sensor response can be enhanced in exact proportion to the number of spectral components. The method is experimentally validated in a 50 km-long distributed optical fiber sensor augmented to 3 pump-probe spectral pairs, demonstrating a signal-to-noise ratio enhancement of 4.8 dB.


Publié dans:
Optics Express, 22, 23, 28584-28595
Année
2014
Publisher:
Washington, Optical Society of America
ISSN:
1094-4087
Laboratoires:


Note: Le statut de ce fichier est: Anyone


 Notice créée le 2014-11-15, modifiée le 2020-05-19

Publisher's version:
Télécharger le document
PDF

Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)