Transverse mode discrimination in long-wavelength wafer-fused vertical-cavity surface-emitting lasers by intra-cavity patterning

Transverse mode discrimination is demonstrated in long-wavelength wafer-fused vertical-cavity surface-emitting lasers using ring-shaped air gap patterns at the fused interface between the cavity and the top distributed Bragg reflector. A significant number of devices with varying pattern dimensions was investigated by on-wafer mapping, allowing in particular the identification of a design that reproducibly increases the maximal single-mode emitted power by about 30 %. Numerical simulations support these observations and allow specifying optimized ring dimensions for which higher-order transverse modes are localized out of the optical aperture. These simulations predict further enhancement of the single-mode properties of the devices with negligible penalty on threshold current and emitted power.


Publié dans:
Optics Express, 21, 22, 26983-26989
Année
2013
Publisher:
Optical Society of America
ISSN:
1094-4087
Laboratoires:




 Notice créée le 2013-11-20, modifiée le 2019-12-05


Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)