Hybrid probabilities and error-domain structural identification using ambient vibration monitoring

For the assessment of structural behaviour, many approaches are available to compare model predictions with measurements. However, few approaches include uncertainties along with dependencies associated with models and observations. In this paper, an error-domain structural identification approach is proposed using ambient vibration monitoring (AVM) as the input. This approach is based on the principle that in science, data cannot truly validate a hypothesis, it can only be used to falsity it. Error-domain model falsification generates a space of possible model instances (combination of parameters), obtains predictions for each of them and then rejects instances that have unlikely differences (residuals) between predictions and measurements. Models are filtered in a two step process. Firstly a comparison of mode shapes based on MAC criterion ensures that the same modes are compared. Secondly, the frequencies from each model instance are compared with the measurements. The instances for which the difference between the predicted and measured value lie outside threshold bounds are discarded. In order to include "uncertainty of uncertainty" in the identification process, a hybrid probability scheme is also presented. The approach is used for the identification of the Langensand Bridge in Switzerland. It is used to falsify the hypothesis that the bridge was behaving as designed when subjected to ambient vibration inputs, before opening to the traffic. Such small amplitudes may be affected by low-level bearing-device friction. This inadvertently increased the apparent stiffness of the structure by 17%. This observation supports the premiss that ambient vibration surveys should be cross-checked with other information sources, such as numerical models, in order to avoid misinterpreting the data. (C) 2012 Elsevier Ltd. All rights reserved.

Publié dans:
Mechanical Systems And Signal Processing, 37, 1-2, 199-212
London, Elsevier

 Notice créée le 2013-10-01, modifiée le 2019-03-16

Télécharger le document

Évaluer ce document:

Rate this document:
(Pas encore évalué)