A potentially robust plasma profile control approach for ITER using real-time estimation of linearized profile response models

An active plasma profile control approach for ITER, which is potentially robust by being tolerant to changing and uncertain physics, has been explored in this work, using a technique based on real-time estimation of linearized profile response models. The linearized models approximate static responses of the plasma profiles to power changes in auxiliary heating and current drive systems. These models are updated in real-time, differing from the model-based technique which deduces a dynamic model from identification experiments. The underlying physics is simplified with several assumptions to allow real-time update of the profile response models; however, without significant loss of information necessary for feedback control of the plasma profiles. The response of the electron temperature profile is modelled by simplifying the electron heat transport equation. The response of the safety factor profile is computed by directly relating it to the changes in source current density profiles. The required actuator power changes are directly computed by inverting the response matrix using the singular value decomposition technique. The saturation of the actuator powers is taken into account and the capability of using quantized auxiliary powers is provided. The potential of our active control approach has been tested by applying it to simulations of the ITER hybrid mode operation using CRONOS. In these simulations, either a global transport model or a theory-based local transport model has been used and the electron temperature and safety factor profiles were well controlled either independently or simultaneously.

Published in:
Nuclear Fusion, 52, 074002

 Record created 2012-08-03, last modified 2018-09-13

Rate this document:

Rate this document:
(Not yet reviewed)