Comparison of Two Different Carbon Nanotube-based Surfaces with Respect to Potassium Ferricyanide Electrochemistry

This paper describes the electrochemical investigation of two multi-walled carbon nanotube-based electrodes using potassium ferricyanide as a benchmark redox system. Carbon nanotubes were fabricated by chemical vapor deposition on silicon wafer with camphor and ferrocene as precursors. Vertically-aligned as well as islands of horizontally-randomly-oriented carbon nanotubes were obtained by varying the growth parameters. Cyclic voltammetry was the employed method for this electrochemical study. Vertical nanotubes showed a slightly higher kinetic. Regarding the sensing parameterswe found a sensitivity for vertical nanotubes almost equal to the sensitivity obtainedwith horizontally/randomly oriented nanotubes (71.5±0.3 μA/(mM cm2) and 62.8±0.3 μA/(mMcm2), respectively). In addition, values of detection limit are of the same order of magnitude. Although tip contribution to electron emission has been shown to be greatly larger than the lateral contribution on single carbon nanotubes per unit area, the new findings reported in this paper demonstrate that the global effects of nanotube surface on potassium ferricyanide electrochemistry are comparable for these two types of nanostructured surfaces.

Published in:
Surface Science, 606, 3-4, 156-160

 Record created 2011-12-14, last modified 2019-04-16

Download fulltext

Rate this document:

Rate this document:
(Not yet reviewed)