Comparison of 3D reaction rate distributions measured in an optima2 BWR assembly with MCNPX predictions

As part of a joint research programme between the Paul Scherrer Institute (PSI) and swissnuclear, with the co-operation of the Leibstadt nuclear power plant in Switzerland and fuel suppliers Westinghouse Sweden, measurements and calculations have been made of the axial and radial distributions of fission and 238U capture rates in the fuel rods of a Westinghouse SVEA-96 Optima2 boiling water reactor assembly. The measurements, made in the zero-energy research reactor PROTEUS at PSI, have been compared with calculations carried out using the Monte Carlo code MCNPX. The results reported are for the regions near the ends of the part-length fuel rods, which are a feature of SVEA-96 Optima2 assemblies. The sudden increase in moderation above the ends of the part-length rods leads to power peaking in the adjacent rods. Careful attention needs to be given to this phenomenon in the deployment of such fuel, the present paper providing experimental evidence for the ability of a stochastic code to predict such effects. [All rights reserved Elsevier].

Published in:
Annals of Nuclear Energy, 35, 11, 2042-50
Elsevier Science Ltd.
Paul Scherrer Inst., Villigen, Switzerland

 Record created 2010-09-17, last modified 2018-03-17

Rate this document:

Rate this document:
(Not yet reviewed)