High-temperature wettability of aluminum nitride during liquid metal infiltration

The high-temperature wettability of AlN particle preforms with pure molten Cu, Al and Ph is quantified by means of drainage curves measured during pressure infiltration. By integrating the drainage curves obtained in this study, the work of immersion for each system can be estimated, allowing in turn to deduce an apparent contact angle for wetting of AlN by these metals. The influence of system nature and temperature on the apparent contact angle are studied and discussed by comparison with literature values measured using the sessile drop method. (C) 2008 Elsevier B.V. All rights reserved.

Published in:
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 495, 1-2, 197-202
Other identifiers:

 Record created 2009-01-07, last modified 2018-01-28

Rate this document:

Rate this document:
(Not yet reviewed)