Serra, NathalieMaeder, ThomasGentsch, OlivierRyser, Peter2011-05-272011-05-272011-05-27201110.1016/j.sna.2011.03.049https://infoscience.epfl.ch/handle/20.500.14299/67925WOS:000298465100050We investigate in the present work the fabrication of polymer-based micro-fluidic and micro-mechanical devices using sacrificial, resistive/conductive pastes, through a screen-printing process. An organic sacrificial paste is first screen-printed onto a substrate, the future opening in the structure existing where the paste lies (channels, cavities...). Then, a resistive paste based on thermosetting polymer resin and graphite is deposited onto the previous layer. Finally, the sacrificial paste is removed at 150°C by sublimation through the composite, leaving therefore the desired pattern. For such applications, the key is naturally the formulation of the pastes. On a previous work, we already proposed a potential formulation for the organic sacrificial paste, based on polyols [1]. In the present paper, we will focus on the formulation of the cover paste, which must be adapted rheologically for the screen-printing process, but also chemically due to strong potential interactions between the sacrificial layer and the over-layer. Finally, micro-devices such as simple fluidic channels and suspended structures were produced and shown to be operational, demonstrating the high potential of our process.couches épaissesthick-film technologymicrostructurescouches sacrificiellessacrificial layersstructurationcouches sublimablessublimable layerspolymèrespolymerssublimationtext::journal::journal article::research article