Cavadini, Giovan BattistaManoli, GabrieleCook, Lauren M.2025-12-022025-12-022025-12-01202510.2139/ssrn.5360890https://infoscience.epfl.ch/handle/20.500.14299/256557Cities are increasingly adopting blue-green infrastructure (BGI) to address the dual challenges of extreme rainfall and rising temperatures driven by climate change. While the potential of BGI for urban stormwater management is well-studied, the cooling effect of stormwater-focused BGI remains underexplored. This study investigates the heat mitigation potential of three stormwater BGI elements, bioretention cells, porous pavements, and detention ponds, within three urban street canyons in a Swiss town near Zurich. The Urban Tethys-Chloris (UT&C) microclimate model was modified to explicitly represent stormwater BGI and assess their influence on the Universal Thermal Climate Index (UTCI) at 2 meters above the ground. Simulations were conducted under both historical climate and a future climate projection, including a sensitivity analysis of soil types. Results show that stormwater BGI reduce median UTCI by 0.2 to 0.5 °C, with peak reductions reaching up to 2.7 °C. However, their effectiveness depends on the type of BGI, the surface it replaces, and the availability of water. Soil properties were found to significantly influence the cooling effect of bioretention cells, with finer-textured soils achieving higher soil moisture levels and greater reductions in UTCI. A trade-off between cooling benefits and stormwater management also emerged: sandy soils favor infiltration but dry quickly, limiting cooling, while clay-rich soils limit infiltration but retain moisture and sustain evaporative cooling, even under future climate conditions with longer dry spells. These findings highlight the importance of integrating hydrological and thermal considerations into BGI design and suggest an integrated design that balance both objectives.ennature-based solutionsUT&C modelurban microclimatebioretention cellsporous pavementpondstext::preprint