Tosolini, G.Villanueva, G.Perez-Murano, F.Bausells, J.2013-08-062013-08-062013-08-06200910.1016/j.mee.2009.11.125https://infoscience.epfl.ch/handle/20.500.14299/93845WOS:000276300700141We report the fabrication of silicon microcantilevers with MOSFET detection, to be used in force measurements for biomolecular detection. Thin cantilevers are required for a high force sensitivity. Therefore the source and drain of the transistors have been fabricated by As implantation to obtain shallow PN junctions. The cantilevers have been oriented on the non-standard (100) crystallographic direction of silicon, to maximize the stress response of the NMOS transistors. The force sensitivity and resolution of the cantilevers have been tested by applying a force with an AFM tip. Values of 25 mu V/pN and 56 pN respectively have been obtained for a force applied at the tip of a cantilever with a length of 200 pm, a width of 24 mu m and a silicon thickness of 340 nm. (C) 2009 Elsevier B.V. All rights reserved.MicrocantileverMOSFETPiezoresistanceBiosensorintermolecular force detectionpiezoresistive cantileverstechnologymicroscopysensorstext::conference output::conference proceedings::conference paper