Yao, WeikunQu, QiangyongVon Gunten, UrsChen, ChaoYu, GangWang, Yujue2017-01-242017-01-242017-01-24201710.1016/j.watres.2016.11.014https://infoscience.epfl.ch/handle/20.500.14299/133480WOS:000390181600038In this study methylisoborneol (MIB) and geosmin abatement in a surface water by conventional ozonation and the electro-peroxone (E-peroxone) process was compared. Batch tests with addition of ozone (03) stock solutions and semi-batch tests with continuous O-2/O-3 gas sparging (simulating real ozone contactors) were conducted to investigate O-3 decomposition, center dot OH production, MIB and geosmin abatement, and bromate formation during the two processes. Results show that with specific ozone doses typically used in routine drinking water treatment (0.5-1.0 mg O-3/mg dissolved organic carbon (DOC)), conventional ozonation could not adequately abate MIB and geosmin in a surface water. While increasing the specific ozone doses (1.0-2.5 mg O-3/mg DOC) could enhance MIB and geosmin abatement by conventional ozonation, this approach resulted in significant bromate formation. By installing a carbon-based cathode to electrochemically produce H2O2 from cathodic oxygen reduction, conventional ozonation can be conveniently upgraded to an E-peroxone process. The electro-generated H2O2 considerably enhanced the kinetics and to a lesser extent the yields of hydroxyl radical (center dot OH) from O-3 decomposition. Consequently, during the E-peroxone process, abatement of MIB and geosmin occurred at much higher rates than during conventional ozonation. In addition, for a given specific ozone dose, the MIB and geosmin abatement efficiencies increased moderately in the E-peroxone (by similar to 8-9% and similar to 10 25% in the batch and semi-batch tests, respectively) with significantly lower bromate formation compared to conventional ozonation. These results suggest that the E-peroxone process may serve as an attractive backup of conventional ozonation processes during accidental spills or seasonal events such as algal blooms when high ozone doses are required to enhance MIB and geosmin abatement. (C) 2016 Elsevier Ltd. All rights reserved.OzoneHydrogen peroxideDrinking water treatmentTaste and odor compoundsBromateComparison of methylisoborneol and geosmin abatement in surface water by conventional ozonation and an electro-peroxone processtext::journal::journal article::research article