Haeberle, MatthiasDjekic, DenisFantner, Georg E.Lips, KlausOrtmanns, MauritsAnders, Jens2018-12-132018-12-132018-12-132018-01-0110.1109/ESSCIRC.2018.8494290https://infoscience.epfl.ch/handle/20.500.14299/152909WOS:000448159800077In this paper, we present an integrator-differentiator transimpedance amplifier (TIA) featuring a multielement pseudo-resistor (MEPR) in the DC feedback path for improved noise performance in the presence of non-zero DC input currents. The presented prototype is implemented in a standard 180 nm CMOS technology and achieves an inband transimpedance of 10 M Omega over a 2.7 MHz signal bandwidth. The MEPR resistor in the DC servo loop can be tuned between 700 k Omega and 100 M Omega enabling a precise adjustment of the TIA's lower cutoff frequency. For a DC feedback resistance of 700 k Omega, the TIA provides an input referred noise floor of 180 fA/root Hz at zero input current, which only marginally increases to 220 fA/root Hz for the maximum bias current of 1 mu A. The TIA consumes 0.6 mm(2) of chip area and 18.5 mW of power from a 1.8 V supply.Engineering, Electrical & ElectronicEngineeringtext::conference output::conference proceedings::conference paper