Hyvl, MatejNogay, GizemLoper, PhilippHaug, Franz-JosefJeangros, QuentinFejfar, AntoninBallif, ChristopheLedinsky, Martin2021-06-192021-06-192021-06-192021-03-0310.1021/acsami.0c21282https://infoscience.epfl.ch/handle/20.500.14299/179125WOS:000626502700054We investigate hole-selective passivating contacts that consist of an interfacial layer of silicon oxide (SiOx) and a layer of boron-doped SiCx(p). The fabrication process of these contacts involves an annealing step at temperatures above 750 degrees C which crystallizes the initially amorphous layer and diffuses dopants across the interfacial oxide into the wafer to facilitate charge transport, but it can also disrupt the SiOx layer necessary for wafer-surface passivation. To investigate the transport mechanism of the charge carriers through the selective contact and its changes during the annealing process, we utilize various characterization methods, such as transmission electron microscopy, micro Raman spectroscopy, and conductive atomic force microscopy. Combining the latter with a sequential removal of material, we assemble a tomographic reconstruction of the crystallized layer that reveals the presence of preferential vertical transport channels.Nanoscience & NanotechnologyMaterials Science, MultidisciplinaryScience & Technology - Other TopicsMaterials Sciencesilicon solar cellpassivating contactscalpel c-afmc-afm tomographycharge-carrier transportmicrocrystalline siliconcarrier transportpoly-sitemperatureresistancemicroscopylayerscellstext::journal::journal article::research article