Combined Exergy and Pinch Analysis for Optimal Energy Conversion Technologies Integration

Exergy concept combined with pinch based approach are used for studying the optimal integration of energy conversion systems. The analysis first considers the representation of the hot and cold composite curves of the process and defines the energy and the exergy requirements. The basic assumption of the DTmin required for the pinch analysis is represented as an exergy loss that increases the exergy requirement of the process. The exergy composite curves put the focus on the opportunities for heat pumping in the process. The optimal integration of the utility system is then realised by extracting the energy conversion system configuration from a superstructure using a Mixed Integer Linear Programming formulation in which the heat cascade definition and the combined heat and power production balances are introduced as constraints and where the exergy losses minimisation is used as an objective function. The balanced exergy composite curves are used to visualise the exergy losses in the heat exchanges and the analysis of the results is made using a definition of the exergy efficiency that accounts for the pinch point location, the process exergy and the exported energy services.

Published in:
ECOS 2005, 18th International Conference on Efficiency, Cost,Optimization, Simulation and Environmental Impact of Energy Systems, 1, 177-184
Trondheim, Norway

Note: The status of this file is: Involved Laboratories Only

 Record created 2005-08-08, last modified 2019-03-16

Download fulltext

Rate this document:

Rate this document:
(Not yet reviewed)