000253053 001__ 253053
000253053 005__ 20181203024951.0
000253053 0247_ $$a10.1016/j.ijmachtools.2011.03.006$$2doi
000253053 037__ $$aARTICLE
000253053 245__ $$aAdaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance
000253053 260__ $$c2011
000253053 269__ $$a2011
000253053 336__ $$aJournal Articles
000253053 520__ $$aKnowledge of a machine tool axis to axis geometric location errors allows compensation and corrective actions to be taken to enhance its volumetric accuracy. Several procedures exist, involving either lengthy individual test for each geometric error or faster single tests to identify all errors at once. This study focuses on the closed kinematic chain method which uses a single setup test to identify the eight link errors of a five axis machine tool. The identification is based on volumetric error measurements for different poses with a non-contact Cartesian measuring instrument called CapBall, developed in house. In order to evaluate the uncertainty on each identified error, a multi-output Monte Carlo approach is implemented. Uncertainty sources in the measurement and identification chain such as sensors output, machine drift and frame transformation uncertainties can be included in the model and propagated to the identified errors. The estimated uncertainties are finally compared to experimental results to assess the method. It also reveals that the effect of the drift, a disturbance, must be simulated as a function of time in the Monte Carlo approach. Results shows that the machine drift is an important uncertainty source for the machine tested.
000253053 700__ $$aAndolfatto, L.
000253053 700__ $$aMayer, J.R.R.
000253053 700__ $$aLavernhe, S.
000253053 773__ $$q618-627$$k7-8$$j51$$tInternational Journal of Machine Tools and Manufacture
000253053 8560_ $$floic.andolfatto@epfl.ch
000253053 909C0 $$xU10309$$pLMH$$0252135
000253053 909CO $$pSTI$$particle$$ooai:infoscience.epfl.ch:253053
000253053 960__ $$aloic.andolfatto@epfl.ch
000253053 961__ $$anoemi.cobolet@epfl.ch
000253053 973__ $$rREVIEWED$$sPUBLISHED$$aOTHER
000253053 980__ $$aARTICLE
000253053 981__ $$aoverwrite