Pore Size Manipulation in 3D Printed Cryogels Enables Selective Cell Seeding

Cryogels are macroporous materials that display remarkable properties, such as high pore interconnection, large surface to volume ratio, and high mechanical stability, making them good candidates for 3D cell culture. However, shaping cryogels remains challenging because of the harsh conditions of synthesis at temperatures as low as −80 °C. In this paper, a solution for the 3D printing of functionalized cryogels is proposed. A microfabricated dispensing probe allowing the last second mixing of cryogel precursors as well as control of the temperature of the extruded material during printing is presented. This dispensing tool allows multilayer 3D printing of cryogels with on demand local pore size change through the control in temperature of the dispensed solution. Moreover, thanks to advanced functionalization of the scaffold, cells can be cultured in 3D within the printed scaffold and exhibited spreading. The ability to tune the pore size of the printed cryogels allows to select during printing where cells will get seeded.


Published in:
Advanced Materials Technologies, 1700340
Year:
2018
Laboratories:


Note: The status of this file is: EPFL only


 Record created 2018-01-30, last modified 2019-05-07

Final:
Download fulltext
PDF

Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)