Development of a processing route for carbon allotrope-based TiC porous nanocomposites

Ti-foils are currently used as a spallation target material to produce radioisotopes for physics research at the ISOLDE facility at CERN. However, radioisotope production rates often decrease over time due to material degradation from high operation temperatures. Due to enhanced release rates, porous nanomaterials are being studied as spallation target materials for isotope production. TiC is a material with a very high melting point making it an interesting material to replace the Ti-foils. However, in its nanometric form it sinters readily at high temperatures. To overcome this, a new processing route was developed where TiC was co-milled with graphite, carbon black or multi-wall carbon nanotubes in order to hinder the sintering of TiC. The obtained nanocomposite particle sizes, density, specific surface area and porosity were characterized and compared using ANOVA. All carbon allotropes mixed with the TiC, were able to successfully stabilize the nanometric TiC, hindering its sintering up to 1500 degrees C for 10 h. 2017 The Author(s). Published by Elsevier Ltd.


Published in:
Journal Of The European Ceramic Society, 37, 13, 3899-3908
Year:
2017
Publisher:
Oxford, Elsevier
ISSN:
0955-2219
Keywords:
Laboratories:




 Record created 2017-09-05, last modified 2018-03-17


Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)