LABORATORY EXPERIMENTS OF PULSED SUBAQEOUS SEDIMENT DENSITY FLOWS: INTERNAL STRATIFICATION AND LAYERING

This paper reports on an experimental study which focuses on reproducing small scale sediment density flows in a laboratory flume. The observations are aimed at improving the parametrization of the relations that govern the transition between different phases of the flows. Dense mixtures of plastic sediment of variable grain size (thermoplastic polyurethane) and water were fed into the water-filled flume by gravity from a supply tank. Different grain-size and slope combinations were examined and the resulting velocity fields were obtained using UVP (Ultrasonic Velocity Profile) at various points along the channel. The flow was imaged through the transparent sidewall to track the velocity of the flow head for each test case. Image analysis also allowed a qualitative characterization of the vertical density stratification and water entrainment during runout. The runout distance and flow thickness are used to highlight the differences in the dynamic behavior of the flow for each test case. Data gathered from the experiments will be exploited in the further development of predictive numerical models for slide-induced debris flows transitioning to turbidity currents.


Editeur(s):
Ghani, Aminuddin Ab. et al.
Publié dans:
Proceedings of the 37th IAHR World Congress, 1071-1079
Présenté à:
37th IAHR World Congress, Kuala Lumpur, Malaysia, August 13-18, 2017
Année
2017
Mots-clefs:
Note:
[1163]
Laboratoires:




 Notice créée le 2017-09-04, modifiée le 2019-03-17

n/a:
Télécharger le document
PDF

Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)