Characterization methodology for lead zirconate titanate thin films with interdigitated electrode structures

The accurate evaluation of ferroelectric thin films operated with interdigitated electrodes is quite a complex task. In this article, we show how to correct the electric field and the capacitance in order to obtain identical polarization and CV loops for all geometrical variants. The simplest model is compared with corrections derived from Schwartz-Christoffel transformations, and with finite element simulations. The correction procedure is experimentally verified, giving almost identical curves for a variety of gaps and electrode widths. It is shown that the measured polarization change corresponds to the average polarization change in the center plane between the electrode fingers, thus at the position where the electric field is most homogeneous with respect to the direction and size. The question of maximal achievable polarization in the various possible textures, and compositional types of polycrystalline lead zirconate titanate thin films is revisited. In the best case, a soft (110) textured thin film with the morphotropic phase boundary composition should yield a value of 0.95P(s), and in the worst case, a rhombohedral (100) textured thin film should deliver a polarization of 0.74P(s). Published by AIP Publishing.

Published in:
Journal of Applied Physics, 121, 20, 204101
Melville, Amer Inst Physics

 Record created 2017-07-10, last modified 2018-09-13

Rate this document:

Rate this document:
(Not yet reviewed)