PCB Design and Fabrication for NEMS Applications

In this project, a resonator was theoretically defined and modelled in an effort to choose appropriate impedance matching between the resonator and outside electronics. Quite Universal Circuit Simulation (QUCS) was used to model the S-parameter of potential electronic circuits. Two types of impedance were tested: LC and transformer. Based on the commercial availability of the components and the S-parameter results, a 3 transformer matching design was chosen. The schematic library and the PCB library of all the components were made on Altium and a first design of the PCB is presented.


Advisor(s):
Villanueva, Guillermo
Year:
2015
Keywords:
Laboratories:




 Record created 2016-09-05, last modified 2018-03-17

n/a:
Download fulltext
PDF

Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)