Monitoring precipitation kinetics in heat treatable aluminium alloys using in-situ resistivity in Gleeble thermomechanical simulator

A conventional way to determine precipitation kinetics in heat treatable aluminium alloys is to monitor the associated solute loss by in-situ resistivity. A Gleeble machine is used to perform so called isothermal quenching (IQ) resistivity measurements. IQ consists in quenching the alloy down to a given temperature and holding it at this temperature. The results are validated against measurements performed with a classical four-points method using continuous current on the same alloy.


Published in:
Materials Science Forum, Vols. 794-796 (2014), pp 921-925
Presented at:
Int. Conf. on Aluminium Alloys, ICAA 2014, Trondheim, Norway, June 2014
Year:
2014
Publisher:
Trans Tech Publications
ISSN:
0255-5476
Keywords:
Laboratories:




 Record created 2014-06-19, last modified 2018-01-28

External link:
Download fulltext
Postprint
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)