Modifier Adaptation for Constrained Closed-Loop Systems

The steady advance of computational methods makes model-based optimization an increasingly attractive method for process improvement. Unfortunately, the available models are often inaccurate. An iterative optimization method called "modifier adaptation" overcomes this obstacle by incorporating process information into the optimization framework. This paper extends this technique to constrained optimization problems, where the plant consists of a closed-loop system but only a model of the open-loop system is available. The degrees of freedom of the closed-loop system are the setpoints provided to the controller, whereas the model degrees of freedom are the inputs of the open-loop plant. Using this open-loop model and process measurements, the proposed algorithm guarantees both optimality and constraint satisfaction for the closed-loop system upon convergence. A simulated CSTR example with constraints illustrates the method.

Published in:
Proceedings of the 19th IFAC World Congress
Presented at:
The 19th World Congress of the International Federation of Automatic Control, Cape Town, South Africa, August 24-29, 2014

Note: The status of this file is: Anyone

 Record created 2013-11-20, last modified 2020-07-29

Download fulltextPDF
External link:
Download fulltextURL
Rate this document:

Rate this document:
(Not yet reviewed)