This thesis was carried out within the framework of a scientific cooperation project entitled “Application of High Power Electromagnetics to Human Safety” developed by the EPFL, the National University of Colombia and Los Andes University, Colombia. The project was funded by the Swiss Agency for Development and Cooperation (SDC) through the EPFL Centre Coopéation & Développement (CODEV). The Scientific Cooperation aimed at the study and development of techniques for the generation of high power electromagnetic signals for the disruption or preemptive activation of Improvised Explosive Devices (IEDs) during humanitarian clearance activities. The results and conclusions of the thesis will be applied to the construction of a resonant radiator, which can be used for securing humanitarian demining operations in Colombia. The thesis is devoted to the analysis of a specific type of resonant radiators known as Switched Oscillators (SWO). An SWO is a radiator constituted by a high voltage charging circuit that drives a quarter-wave transmission line resonator connected to an antenna. An SWO can produce high-amplitude, short duration, electromagnetic fields, with a moderate bandwidth, when compared to the main resonance frequency. The outcome of the thesis can be also be used in electromagnetic compatibility applications, for the production of resonant, high power electromagnetic fields, with the aim of testing the immunity of electronic systems against Intentional Electromagnetic Interference (IEMI) attacks. The thesis is divided in three parts. The first part deals with the electrostatic design of an SWO. A method for producing an optimized design of the electrodes forming the spark gap of the SWO is presented. The method is based on the generation of a curvilinear coordinate space on which the electrodes are conformal to one of the coordinate axis of the space. Laplace equation is solved in the interelectrodic space, obtaining an analytical solution for the electrostatic distribution. Furthermore, using appropriate mathematical manipulations, we derive an analytical expression for the impedance of the transmission line formed by the proposed electrodes. The second part of the thesis is devoted to the analysis of SWOs in the frequency domain. An original analysis approach, based on the chain-parameter technique, is proposed in which the SWO and the connected antenna are described using a two-port network using which a transfer function between the input voltage and the radiated field is established. A closed form expression of the resonance frequency of the SWO is also obtained. The developed technique makes it possible to study the response of an SWO when connected to an arbitrary antenna with a frequency-dependent input impedance. The final part of the thesis presents the construction and test of an SWO prototype. The prototype design is based on the theoretical developments presented in the first two parts of the thesis. The realized SWO is experimentally characterized using different antennas. It is characterized by an input voltage of 30 kV and a resonance frequency of 433 MHz. Radiated electric fields using monopole antennas were in the order of 10 kV/m at a distance of 1.5 m. The prototype is used for testing the validity of the electrodynamic model for the analysis of SWOs connected to frequency dependent antennas. Different monopole antennas connected to the SWO are considered and the radiated fields are measured and compared with theoretical calculations. It is shown that the developed theoretical model is able to reproduce with a good accuracy the behavior of the SWO connected to a frequency dependent antenna.