Analysis of Defective Interconnections of the 13 kA LHC Superconducting Bus Bars

The interconnections between Large Hadron Collider (LHC) main dipole and quadrupole magnets are made of soldered joints of two superconducting cables stabilized by a copper bus bar. The 2008 incident revealed the possible presence of defects in the interconnections of the 13 kA circuits that could lead to unprotected resistive transitions. Since then thorough experimental and numerical investigations were undertaken to determine the safe operating conditions for the LHC. This paper reports the analysis of experimental tests reproducing defective interconnections between main quadrupole magnets. A thermo-electromagnetic model was developed taking into account the complicated sample geometry. Close attention was paid to the physical description of the heat transfer towards helium, one of the main unknown parameters. The simulation results are reported in comparison with the measurements in case of static He I cooling bath. The outcome of this study constitutes a useful input to improve the stability assessment of the 13 kA bus bars interconnections.

Published in:
Ieee Transactions On Applied Superconductivity, 22, 3
Presented at:
22nd International Conference on Magnet Technology (MT)
Piscataway, Ieee-Inst Electrical Electronics Engineers Inc

 Record created 2013-02-28, last modified 2018-03-17

Rate this document:

Rate this document:
(Not yet reviewed)