000178710 001__ 178710
000178710 005__ 20180913061357.0
000178710 020__ $$a978-1-4577-0918-0
000178710 0247_ $$2doi$$a10.1109/EuCAP.2012.6206226
000178710 037__ $$aCONF
000178710 245__ $$aA New Power Divider Architecture for Suspended Strip Line
000178710 260__ $$c2012
000178710 269__ $$a2012
000178710 336__ $$aConference Papers
000178710 520__ $$aIn this paper the authors present a novel power divider architecture intended to be used with the Suspended Strip Line (SSL) transmission line. The new antenna array systems, that are designed to work in the millimetre wave ranges, are suffering from the losses in their beam forming networks. In order to mitigate the losses one can use special types of transmission lines. One of them is the so-called Suspended Strip Line (SSL). In this paper the authors present a novel RF power divider intended to be used with the SSL. It uses the properties of the suspended stripline geometry in order to give the designer an increased number of degrees of freedom to achieve the desired power division ratio and a good input match. The advantages of the proposed geometry are compactness, good power handling, no need of any soldering or introducing lumped elements and the sole use of standard 50 Ohm lines.
000178710 700__ $$0242770$$aZürcher, Jean-François$$g106782
000178710 700__ $$0242786$$aGlogowski, Rafal$$g197049
000178710 700__ $$0240432$$aMosig, Juan Ramon$$g105917
000178710 7112_ $$a6th European Conference on Antennas and Propagation (EUCAP)$$cPrague, Czech Republic$$d26-30 March 2012
000178710 773__ $$tProc. of the 6th European Conference on Antennas and Propagation (EUCAP)
000178710 8564_ $$s414422$$uhttps://infoscience.epfl.ch/record/178710/files/06206226.pdf$$yPublisher's version$$zPublisher's version
000178710 909C0 $$0252091$$pLEMA$$xU10374
000178710 909CO $$ooai:infoscience.tind.io:178710$$pconf
000178710 917Z8 $$x114730
000178710 937__ $$aEPFL-CONF-178710
000178710 973__ $$aEPFL$$rREVIEWED$$sPUBLISHED
000178710 980__ $$aCONF