Design of Resonant Clock Distribution Networks for 3-D Integrated Circuits

Designing a low power clock network in synchronous circuits is an important task. This requirement is stricter for 3-D circuits due to the increased power densities. Resonant clock networks are considered efficient low-power alternatives to conventional clock distribution schemes. These networks utilize additional inductive circuits to reduce the power consumption while delivering a full swing clock signal to the sink nodes. A design method for 3-D resonant clock networks is presented. The proposed design technique supports resonant operation for pre-bond test, an important requirement for 3-D ICs. Several 3-D clock network topologies are explored in a 0.18 μm CMOS technology. Simulation results indicate 43% reduction in the power consumed by the resonant 3-D clock network as compared to a conventional buffered clock network.


Publié dans:
Proceedings of the 21st International Conference on Integrated Circuit and System Design: Power and Timing Modeling, Optimization, and Simulation (PATMOS), 267-277
Présenté à:
21st International Conference on Integrated Circuit and System Design: Power and Timing Modeling, Optimization, and Simulation (PATMOS), Madrid, Spain, September 26-29, 2011
Année
2011
Publisher:
Berlin, Springer-Verlag
ISBN:
978-3-642-24153-6
Mots-clefs:
Laboratoires:




 Notice créée le 2011-12-14, modifiée le 2019-03-16

n/a:
Télécharger le document
PDF

Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)