In-situ testing of a heat exchanger pile

The behavior of a pile subjected to thermo-mechanical loadings was studied in situ with the aim of quantifying the thermal influence on the bearing capacity of heat exchanger piles. A pile situated in a building under construction was equipped with a channel system to inject heat into it using a special heat pump. Load cells, deformation gauges and thermometers were installed to evaluate the behavior of the pile during seven tests with coupled thermomechanical loadings. The temperature variations applied to the pile were on the order of 15°C, and the mechanical load reached 1300 kN. The results obtained permitted the quantification of three significant effects brought about by the temperature increase: i. pile uplift, ii. mobilization of side friction due to the relative displacement of the pile with respect to the ground, and iii. additional load generated in the pile by constrain of the thermal stains.


Publié dans:
Geo-Frontiers 2011 - Advances in Geotechnical Engineering, 410-419
Présenté à:
Geo-Frontiers 2011 Conference, ASCE, Dallas, Texas, USA, March 13-16, 2011
Année
2011
Publisher:
ASCE
Laboratoires:


Note: Le statut de ce fichier est: Seulement EPFL


 Notice créée le 2011-03-13, modifiée le 2018-09-13

Publisher's version:
Télécharger le document
PDF

Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)