SOI hall-sensor front end for energy measurement

The growing demand for the solid-state meters for power and energy measurement leads to the fully integrated Hall-sensor-based microsystem solutions. In this paper, a silicon-on-insulator (SOI) Hall-sensor-based. microsystem for energy measurements with dynamic offset cancellation was described. The Hall sensor is used to multiply the line voltage and the line current, giving an output voltage proportional to the instantaneous power. Furthermore, the voltage at the Hall output is proportional to the line active power and can be further processed. By converting the sensor output voltage to a digital signal using a delta-sigma (A E) modulator followed by a digital filtering, the energy consumption is observed at the end of the processing chain. The entire microsystem has been integrated in an experimental 0.5-mu m fully depleted SOT process and has a measured output error of less than +/- 1.5%.


Publié dans:
Ieee Sensors Journal, 6, 4, 1016-1021
Année
2006
ISSN:
1530-437X
Note:
Times Cited: 0
Laboratoires:




 Notice créée le 2010-10-21, modifiée le 2018-12-03


Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)