Modulation frequency-shift technique for dispersion measurements in optical fibers

An improved technique for chromatic dispersion measurements in single-mode fibers using phase-shift measurements is presented. The conventional experimental setup using a modulated light-emitting diode filtered by a monochromator as a light source, a fast receiver, and a vector voltmeter for the phase measurements suffers from inherent drawbacks such as strong phase fluctuations due to poor SNR and RF interference providing biased measurements. The improved method eliminates these drawbacks with optical signal processing by shifting the modulation frequency down to the kilohertz range and maintaining the phase resolution due to high-frequency modulation. The advantages inherent in low-frequency detection and signal processing, such as stability, low noise, and strong filtering capability, and the resolution achieved by using a high modulation frequency result in reliable and accurate group delay measurements, giving a measured standard deviation of <0.5 nm for the zero chromatic dispersion wavelength.

Published in:
Optical Fiber Communication Conference, 1988 Technical Digest Series, 1, 86
Presented at:
Optical Fiber Communication Conference, New Orleans, Louisiana, USA, 1988
Washington, DC, USA, Optical Society of America,

Note: The status of this file is: Anyone

 Record created 2010-04-07, last modified 2020-07-30

Publisher's version:
Download fulltextPDF
External link:
Download fulltextURL
Rate this document:

Rate this document:
(Not yet reviewed)