Efficient active Bragg grating tunable filters

Reflection, transmission and loss filters based on fiber Bragg gratings are key components in future wavelength division multiplexing telecommunication networks. A shift of the Bragg wavelength, λg, can be achieved by applying a strain or heating the fiber section containing the grating. We report on Bragg grating devices that use a thin metallic coating to directly heat the fiber or a piezoelectric coating to strain it. Such integrated tunable filter devices show DC tuning and modulation capabilities with promise for enhanced efficiency, reduced size, and low electrical power consumption. New active Bragg grating devices based on thin metallic and piezoelectric coatings have been demonstrated showing efficiencies of 4 nm/W and 12 pm/V, respectively

Published in:
Bragg Gratings, Photosensitivity, and Poling in Glass fibers and Waveguides: Applications and Fundamentals, Technical Digest Series OSA Vol. 17, paper BTuA5
Presented at:
Bragg Grating, Photosensitivity, and Poling in Glass Fibers and Waveguides: Applications and Fundamentals (BGPP)
Opt. Soc. America
Inst. of Appl. Opt., Fed. Inst. of Technol., Lausanne, Switzerland, 6117510, active Bragg grating tunable filters, loss filters, transmission filters, reflection filters, fiber Bragg gratings, wavelength division multiplexing telecommunication networks, Bragg wavelength, strain, heating, fiber section, grating, Bragg grating devices, thin metallic coating, piezoelectric coating, integrated tunable filter devices, DC tuning, modulation capabilities, enhanced efficiency, reduced size, low electrical power consumption, active Bragg grating devices

 Record created 2009-01-20, last modified 2018-04-19

Rate this document:

Rate this document:
(Not yet reviewed)