000130802 001__ 130802
000130802 005__ 20181203021412.0
000130802 0247_ $$2doi$$a10.1016/j.msea.2007.12.050
000130802 02470 $$2DAR$$a13555
000130802 02470 $$a000260545900035$$2ISI
000130802 037__ $$aARTICLE
000130802 245__ $$aHigh-temperature wettability of aluminum nitride during liquid metal infiltration
000130802 269__ $$a2008
000130802 260__ $$c2008
000130802 336__ $$aJournal Articles
000130802 520__ $$aThe high-temperature wettability of AlN particle preforms with pure molten Cu, Al and Ph is quantified by means of drainage curves measured during pressure infiltration. By integrating the drainage curves obtained in this study, the work of immersion for each system can be estimated, allowing in turn to deduce an apparent contact angle for wetting of AlN by these metals. The influence of system nature and temperature on the apparent contact angle are studied and discussed by comparison with literature values measured using the sessile drop method. (C) 2008 Elsevier B.V. All rights reserved.
000130802 700__ $$aKida, M.
000130802 700__ $$0240160$$g152465$$aBahraini, M.
000130802 700__ $$0240155$$g167543$$aMolina, J. M.
000130802 700__ $$g115064$$aWeber, L.$$0240158
000130802 700__ $$aMortensen, A.$$g112836$$0240159
000130802 773__ $$j495$$tMaterials Science And Engineering A-Structural Materials Properties Microstructure And Processing$$k1-2$$q197-202
000130802 909C0 $$xU10336$$0252046$$pLMM
000130802 909CO $$pSTI$$particle$$ooai:infoscience.tind.io:130802
000130802 937__ $$aLMM-ARTICLE-2008-022
000130802 973__ $$rREVIEWED$$sPUBLISHED$$aEPFL
000130802 980__ $$aARTICLE