000120091 001__ 120091
000120091 005__ 20190228220132.0
000120091 0247_ $$2doi$$a10.1109/TASC.2004.830686
000120091 022__ $$a1051-8223
000120091 02470 $$2ISI$$a000223147500334
000120091 037__ $$aARTICLE
000120091 245__ $$aAn alternative CICC design aimed at understanding critical performance issues in Nb3Sn conductors for ITER
000120091 260__ $$c2004
000120091 269__ $$a2004
000120091 336__ $$aJournal Articles
000120091 500__ $$aSp. Iss. SI
000120091 520__ $$aWithin the EFDA technology program, CRPP designed and prepared a short length of full size Nb3Sn developmental conductor to be tested in the SULTAN test facility. Nb3Sn strand with a higher specification and low Cu:non-Cu ratio was supplied by Outokumpu. Half of the produced wire length has been Cr-plated half was left bare. Subsequently, two Ti-jacketed cable-in-conduit conductors based on a braid as the first stage, have been manufactured by VNIIKP. After reaction heat treatment, the annular space of the conductor piece without coating was filled with solder. The measurements indicate a higher performance of the solder-filled conductor suggesting that an adequate mechanical support of the strands in the cable may avoid transverse load degradation.
000120091 6531_ $$aITER
000120091 700__ $$aPasztor, G.
000120091 700__ $$0240063$$g113537$$aBruzzone, P.
000120091 700__ $$aAnghel, A.
000120091 700__ $$aStepanov, B.$$g134508$$0240062
000120091 773__ $$j14$$tIeee Transactions on Applied Superconductivity$$k2$$q1527-1530
000120091 909C0 $$pCRPP
000120091 909C0 $$0252028$$pSPC
000120091 909CO $$pSB$$particle$$ooai:infoscience.tind.io:120091
000120091 909C0 $$xU12272$$xU12268$$xU10558$$xU10635$$xU12266$$xU10636$$xU10137$$xU12270$$xU10557$$xU12273$$xU10559$$xU12271$$xU12269$$xU12267$$xU10136
000120091 937__ $$aCRPP-ARTICLE-2004-036
000120091 973__ $$rREVIEWED$$sPUBLISHED$$aEPFL
000120091 980__ $$aARTICLE