Ancey, Christophe
Monte Carlo calibration of avalanches described as Coulomb fluid flows
Philosophical Transactions: A Mathematical, Physical & Engineering Sciences, The Royal Society
363
1832
1529-1550
The idea that snow avalanches might behave as granular flows, and thus be described as Coulomb fluid flows, came up very early in the scientific study of avalanches, but it is not until recently that field evidence has been provided that demonstrates the reliability of this idea. This paper aims to specify the bulk frictional behaviour of snow avalanches by seeking a universal friction law. Since the bulk friction coefficient cannot be measured directly in the field, the friction coefficient must be calibrated by adjusting the model outputs to closely match the recorded data. Field data are readily available but are of poor quality and accuracy. We used Bayesian inference techniques to specify the model uncertainty relative to data uncertainty and to robustly and efficiently solve the inverse problem. A sample of 173 events taken from seven paths in the French Alps was used. The first analysis showed that the friction coefficient behaved as a random variable with a smooth and bell-shaped empirical distribution function. Evidence was provided that the friction coefficient varied with the avalanche volume, but any attempt to adjust a one-to-one relationship relating friction to volume produced residual errors that could be as large as three times the maximum uncertainty of field data. A tentative universal friction law is proposed: the friction coefficient is a random variable, the distribution of which can be approximated by a normal distribution with a volume-dependent mean.
monte carlo calibration;
avalanche;
fluid flow;
2005
http://infoscience.epfl.ch/record/111446/files/Monte%20carlo%20calibration...%2C%20phil.trans.r.soc.A%2C%202005%2C%20363%2C%20Ancey%20LHE.pdf;