We report the development of piezoresistive cantilevers for intermolecular force detection in biochemical sensing, by using a commercial CMOS technology. The detection of the small forces involved in molecular recognition requires cantilevers with a small spring constant and high force sensitivity. We have fabricated polycrystalline silicon cantilevers by using the two polysilicon layers of a commercial CMOS process with minimum design rule widths. The cantilevers have been released by post-process micromachining. The upper polysilicon layer has been used as a piezoresistor. CMOS amplifying circuits have been integrated on-chip with the cantilever structures. The cantilevers have small spring constants ranging from 1.5 to 12 mN/m. The complete system has been successfully tested by applying a known transverse displacement with an AFM tip. A force sensitivity of 8 mu V/pN and resolution of 50 pN has been obtained. This high resolution is obtained with CMOS polysilicon, which has a relatively low piezoresistive coefficient, but this is compensated by the integration of signal-processing circuitry.