Templating Sol-Gel Hematite Films with Sacrificial Copper Oxide: Enhancing Photoanode Performance with Nanostructure and Oxygen Vacancies
Nanostructuring hematite films is a critical step for enhancing photoelectrochemical performance by circumventing the intrinsic limitations on minority carrier transport. Herein, we present a novel sol-gel approach that affords nanostructured hematite films by including CuO as sacrificial templating agent. First, by annealing in air at 450 degrees C a film comprising an intimate mixture of CuO and Fe2O3 nanopartides is obtained. The subsequent treatment with NaCl and annealing at 700 degrees C under Argon reveals a nanostructured highly crystalline hematite film devoid of copper. Photoelectrochemical investigations reveal that the incorporation of CuO as templating agent and the inert conditions employed during the annealing play a crucial role in the performance of the hematite electrodes. Mott-Schottky analysis shows a higher donor concentration when annealing in inert conditions, and even higher when combined with the NaCl treatment. These findings agree well with the presence of an oxygen-deficient shell on the material's surface evidenced by FT-IR and XPS measurements. Likewise, the incorporation of the CuO enhances the photocurrent obtained at 1.23 V from 0.55 to 0.8 mA.cm(-2) because of an improved nanostructure. Optimized films demonstrate an incident photon-to-current efficiency (IPCE) of 52% at 380 nm when applying 1.23 V versus RHE, and a faradaic efficiency for water splitting close to unity.
WOS:000359683600015
2015
7
31
16999
17007
REVIEWED