Oxidation of arsenite, As(III), to arsenate, As(V), is required for the efficient removal of arsenic by many water treatment technologies. The photocatalyzed oxidation of As(III) on titanium dioxide, TiO2, offers an environmentally benign method for this unit operation. In this study, we explore the efficacy and mechanism of TiO2-photocatalyzed As(III) oxidation at circumneutral pH and over a range of As(III) concentrations approaching those typically encountered in water treatment systems. We focus on the effect of As adsorption on observed rates of photooxidation. Adsorption (in the dark) of both As(III) and As(V) on Degussa P25 TiO2 was examined at pH 6.3 over a range in dissolved arsenic concentrations, [As]diss, of 0.10-89 μM and 0.2 or 0.05 g L-1 TiO2 for As(III) and As(V), respectively. Adsorption isotherms generally followed the Langmuir-Hinshelwood model with As(III) exhibiting an adsorption maxima of 32 μmol g-1. As(V) adsorption did not reach a plateau under the experimental conditions examined; the maximum adsorbed concentration observed was 130 μmol g -1. The extent of As(III) and As(V) adsorption observed at the beginning and end of the kinetic studies was consistent with that observed in the adsorption isotherms. Kinetic studies were performed in batch systems at pH 6.3 with 0.8-42 μM As(III) and 0.05 g L-1 TiO2; complete oxidation of As(III) was observed within 10-60 min of irradiation at 365 nm. The observed effect of As(III) concentration on reaction kinetics was consistent with surface saturation at higher concentrations. Addition of phosphate at 0.5-10 μM had little effect on either As(III) sorption or its photooxidation rate but did inhibit adsorption of the product As(V). The selective use of hydroxyl radical quenchers and superoxide dismutase demonstrated that superoxide, O2 .-, plays a major role in the oxidation of As(III) to As(V). © 2005 American Chemical Society.