Dynamic Thermal Performance of the BIPV Facades
Building-integrated photovoltaics (BIPV), generally integrated on the roofs, are more and more often installed on the facade as a result of a growing need in renewable energy generating surfaces. This allows maximizing the use of the building surfaces to generate electricity on-site and to get closer to achieving the Net Zero Energy (NZE) performance. Typically, PVs are separated from the building envelope by an air gap that is formed due to the presence of battens or anchors to attach the panels to the building envelope. Dynamic variation of the thermo-hydraulic performance of the airflow in the air gap can influence the performance of the PV panels generating waste heat by affecting the heat removal from the back surface of the panels. The effect of the ventilated air gap on the thermal performance of a facade with a typical polycrystalline PV panel is investigated in this paper. A numerical transient 2-D model is developed and verified against the existing experimental studies in the literature. Simulations are performed for both natural and forced-induced flow behind the vertical external cladding incorporating a fixed width of the cavity. Variations of the heat flow in the air gap, the heat flux passing through the interior side of the building, and the electrical efficiency of the PV module provided for two representative days in the summer and winter of the Swiss climate zone 5. The results reveal that the thermal performance of the entire wall assembly, as well as the electrical efficiency of the PV panel, dynamically change during the day, which is mainly due to the contribution of the ventilated air space.
WOS:000725205700020
2021-01-01
978-1-947192-91-1
Atlanta
ASHRAE Transactions
127
170
178
REVIEWED
Event name | Event place | Event date |
ELECTR NETWORK | Feb 09-11, 2021 | |