Sizing and siting of a utility scale distributed battery energy storage system
The report focuses on the development of a practical and scalable methodology for the planning and operation of Active Distribution Networks (ADNs) with particular reference to the integration of Energy Storage Systems (ESSs) owned, and directly controlled, by the Distribution Network Operators (DNOs). In this respect, an exact convex formulation of the Optimal Power Flow (OPF) problem, called Augmented Relaxed OPF (AR-OPF), is first proposed for the case of radial power networks [1]-[3]. The proposed formulation takes into account the correct model of the lines (i.e., the non-approximated two-port Π model) and, therefore, the full AC load flow equalities. Moreover, the security constraints related to the nodal voltage magnitudes, as well as the lines ampacity limits, are suitably incorporated into the AR-OPF using a set of more conservative constraints. Therefore, the AR-OPF is characterized by a slightly reduced space of feasible solutions where the removed space is in correspondence of the ones close to the technical limits of the grid. Sufficient conditions have been identified to guarantee that the solution of the AR-OPF formulation is feasible and optimal, i.e., the relaxation used in the formulation is exact [1]. Moreover, by analyzing the exactness conditions, it is revealed that they are mild and hold for real distribution networks operating in feasible region. Then, by making use of the AR-OPF method, we formulate a specific optimization problem associated to the optimal resource planning and operation in ADNs with particular reference to the case of Battery Energy Storage Systems (BESSs). In this respect, it is assumed that the ESSs are owned, and directly controlled, by the DNOs. The objective function is augmented aiming at finding the optimal trade-off between technical and economic goals. In particular, the proposed procedures accounts for (i) network voltage deviations, (ii) feeders/lines congestions, (iii) network losses, (iv) cost of supplying loads (from external grid or local producers) together with the cost of ESS investment/maintenance, (v) load curtailment and (vi) stochasticity of loads and renewables production. The use of decomposition methods for solving the targeted optimization problems with discrete variables and probable large size is also investigated (see [3] for further details). More specifically, Benders decomposition and Alternative Direction Method of Multipliers (ADMM) techniques are successfully applied to the solution of the targeted problems. The developed technique is the applied to the siting and sizing problem of the BESS in the electrical distribution feeder of Onnens (medium voltage) that is expected to be used as demonstration sites for the Phase II of the SCCER-FURIES.
2017-12-01
9
NON-REVIEWED